Remover Massage

Remover Massage

Process for preparing hot stone massage

Preparation of the session of hot stone massage usually takes more than one hour. To save time, you need to prepare the massage room before the start of the session. You should also check that the stones massage to be used in the session are already heated. clean linen must be placed in the massage table. You can also play relaxing music during the massage. After setting up all the things needed for the session, you can now ask the customer to make room massage. You must provide details on the hot stone massage to all customers, regardless of whether it's their first time to receive a stone massage hot massage. Here are the basic steps you must perform during the session:

1. Prep table

Put sheets on the massage table. You can put a lambswool under the sheet to make your customers feel more comfortable during the session. Eight flat stones with an average size should be backcourt set to the client. You need to arrange the stones in two and each stone must have one to two inches between the two.

2. Client position on the table

Ask your client to rest his back in order not to touch the stone massage. Calculations must be placed on each area of the back. Customers must also have the proper attire for the session.

3. Front of the customer

You can start the massage by pouring oil on the face of the customer. Four stones in small sizes are required. Put a stone on the forehead, another on the lips and the other two on each cheek.

4. The forelimbs Customer

The next part of leg massage client. Discover one leg and start massaging the leg with oil. You must choose what stone to use in massaging the legs of the client. stone size will depend on the size of the client. Each party will then massage the legs with rocks selected. Ask your client to pressure. Once you've finished putting a small stone on the feet of the customer and cover the leg. Repeat procedure on the other leg and the toes of the customer.

5. Arms of the Customer

Discover a client's arm. oil spread on the client's arm and use your fingers and palms to massage the arm of a mild stroke and complete. flat stones with an average size can be used to massage the client's arm. After massaging the arm, you can put a hot stone massage on the palm of the customer. Repeat the procedure on the other arm of the client.

6. Ask the customer to return

You can now remove the stones you've placed on the client side, on the feet and the palms of the client. You can ask your client to lie on one side so you can easily remove the stones on the massage table.

Make sure your client is properly covered when lying in front of you. Undrape the back of the client and massage it with oil using a buffing bar. After finishing in the rear area of the client, put a pebble on each of the back region. Put a stone on each side of the customer's shoulder. You must also place a stone on each shoulder area of the client and the other on the lower back of the customer. After this cover the back of the client and put a stone round average companies on the palm of the hand client.

7. Return legs of the client

Discover a leg again and put a stone under the medium or large buttocks the client. Place a stone over the area behind the knee and calf. Cover the leg and repeat the procedure on the other leg of the customer.

8. Scalp of the client

Massage the scalp of the client with the client's neck and shoulder.

9. Remove stones

A fitted sheet on the back of the customer and to aside all the stones and then draped again. You should also explore the client's legs and put away all the stones. After removing all stones again covered the legs of the customer.

10. Final stage

Back massage client and leg with effleurage stroke more cover. End of massage using only the fingertips with a little nerve.